|
|
 |
 Product information > Pipe orbital welding device |
 |
| Since most of the pipe welding processes are being done manually, their inconsistent quality is becoming a serious issue in the industry. Pipe welding in skyscrapers, LNG transporter pipes and other various high quality pipes now require high quality welding in order to satisfy its users. Also, manual pipe welding process causes various muscular-skeletal diseases in pipe welding workers. Our device uses round guide rail and a welding device that move along the guide rail. It is equipped with motor movement slides that allow the user to adjust the welding torch’s height and horizontal location. The user can use the touch screen on the control panel to set various welding conditions (welding current, voltage, speed and others). These functions allow the users to achieve consistent high quality welding in all cases. |
 |
| NO |
Category |
Specifications |
Remarks |
| 1 |
Applied welding technique |
CO2 welding 1 POLE |
 |
| 2 |
CO2 welding 1 POLE |
Pipe groove welding (orbital, horizontal position) |
| 3 |
Major functions |
Welding condition memory, automatic operation, detection of welding point |
| 4 |
Device size |
335(L) * 212(D) * 218(H) mm |
| 5 |
Weight |
App. 7.5 KG (Torch not included) |
| 6 |
Input power |
AC 220V |
| 7 |
Composition |
welding device + control box + remote control +
Guide rail and various cables 10m |
|
 |
| Classification |
Category |
Specifications |
Remarks |
| Carriage motor |
Motor, decelerator |
DC MOTOR, 2 axis (Made in Swiss) |
|
| Movement method |
Two movement roller friction movement method, no backlash |
|
| Movement speed |
0 - 3,180 MM/MIN |
|
| Torch horizontal slide |
Motor, decelerator |
BLDC MOTOR, (Made in Swiss) |
Weaving function |
| Movement method |
LM GUIDE + BALL SCREW movement |
|
| Movement speed / distance |
0 - 2,140 MM/MIN / 60MM |
|
| Limit switch |
1 unit each in front and back |
|
| Torch vertical slide |
Motor, decelerator |
DC MOTOR, (Made in Swiss) |
|
| Movement method |
LM GUIDE + BALL SCREW |
|
| Movement speed / distance |
500 MM/MIN / 60MM |
|
| Limit switch |
1 unit each in upper and lower unit |
|
| Control box |
Main control device |
PLC (Mitsubishi Q series) |
 |
| Input welding condition |
Touch screen (Mitshubishi, 8.4“, 16 colors) |
| Weight |
App. 18KG |
| Remote control |
Function |
Device adjustment and welding condition adjustment |
 |
| Cable length |
10 M |
| Weight |
App 1.5KG (Cable not included) |
| Guide rim |
Exterior |
Customized manufacturing based on pipe size |
 |
| Weight |
App. 8KG (For 20") |
| Installation method |
Pressure method using clamps |
|
|
