|
|
 |
 Product information > Ultra-light high speed weaving fillet welding carriage |
 |
| It is a device that is used for high-speed welding of horizontal fillet. It significantly improved welding defect rates. |
 |
| NO |
Category |
Specifications |
Remarks |
| 1 |
Applied welding technique |
CO2 welding 1 POLE |
 |
| 2 |
Applied welding form |
Horizontal fillet welding |
| 3 |
Torch weaving device |
High speed weaving using cam method
|
| 4 |
Control method |
Used digital micro processor
|
| 5 |
Weight |
App. 6.5 KG (Including weaving device)
|
| 6 |
Input power |
AC 220V |
| 7 |
Carriage TYPE |
4 wheel + Magnet installation
|
| 8 |
Composition |
Carriage + Torch weaving device + Control box +
Flexible welding torch 5m
|
|
 |
| Classification |
Category |
Specifications |
Remarks |
| carriage |
Motor |
DC MOTOR 24V, encoder installation type |
|
| Movement method |
4 rubber wheel + chain + motor |
|
| Movement speed |
100 - 1,000 MM/MIN |
|
| Magnet |
Internal installation |
|
| Traction power |
12 KGF |
|
| Welding line tracking method |
Angle tracking method using guide roller |
Guide roller Ø40 |
| Limit switch |
2 units, front and back |
|
| Slide |
Slide method |
2 guide shaft * triangle bolt |
|
| Vertical adjustment distance |
30 MM |
|
| Forward-backward adjustment distance |
30 MM |
|
| Welding angle adjustment |
35 degrees – 55 degrees, bolt adjustment method |
|
| Operation angle adjustment |
Fixed |
|
| Control box |
Carriage adjustment |
Movement speed, start, stop, welding selection, movement direction selection |
 |
| Weaving torch adjustment |
Weaving frequency adjustment, start/stop |
| Speed and frequency adjustment |
Setting using LED panel |
| Weaving frequency adjustment |
0.5 - 7.5 HZ (Adjustment by 0.5HZ) |
| Control board |
One carriage and weaver 2-motor control |
| Torch weaving device |
Weaving width |
0 - 6 MM |
| Weaving motor |
DC MOTOR 24V, encoder installation type |
| Weaving width adjustment |
Continuous adjustment using handles |
|
|
