|
|
 |
 Product information > Torch moving fillet automatic welding carriage |
 |
| As an automatic carriage for horizontal fillet welding, it improved defects of having 200mm of non-welding zone at start/ending point when existing devices are used. Such non-welding zone defects become a big issue when short distance welding work is needed. Our device maximized automatic welding rate using multi-axial motors and minimized defects rates with our accumulated experiences in the field. |
 |
| NO |
Category |
Specifications |
Remarks |
| 1 |
Applied welding technique |
CO2 axis 1 POLE |
 |
| 2 |
Applied welding form |
Horizontal fillet welding |
| 3 |
Torch movement and non-welding zone
|
150mm, 30mm of non-welding zone at start/ending point
|
| 4 |
Device size
|
210(L) * 326(D) * 265(H) mm
|
| 5 |
Weight |
App. 7.5 KG (Torch not included)
|
| 6 |
Input power |
AC 220V (Standard) |
| 7 |
Carriage TYPE |
4 wheel + magnet installation
|
| 8 |
Composition |
Carriage + Power cable 30m |
|
 |
| Classification |
Category |
Specifications |
Remarks |
| Carriage motor |
Motor, decelerator |
DC MOTOR 12V, 10W, 1/90 |
|
| Movement method |
4 rubber wheels + chain + motor |
|
| Movement speed |
100 - 940 MM/MIN |
|
| Magnet |
Permanent magnet installation |
|
| Traction power |
12 KGF |
|
| Welding line tracking method |
Angle tracking method using guide roller |
Guide roller Ø40 |
| Limit switch |
1 unit, close sensor |
|
| Torch movement slide |
Motor, decelerator |
DC MOTOR 12V, 10W, 1/10
|
|
| Slide method |
LM guide + Ball screw + DC motor
|
|
| ̵Movement distance |
150 MM (Starting point 75mm, End point 75mm) |
|
| Location switch |
3 units (starting, middle, ending point) |
|
| Speed adjustment |
Synchronized with carriage speed |
|
| Synchronized with carriage speed |
Slide/ method |
Forward-backward adjustment/ screw + handle adjustment |
|
| Distance |
20MM |
|
| Control box |
Carriage adjustment |
Movement speed, start, stop, welding/non welding |
|
| Connector |
Circular 16-4P
|
|
| Controller |
1-Control PCB equipped |
|
| Torch weaving device |
(Starting point)
Carriage – Stop
Torch – Moving, welding
|
(Middle point)
Torch – Reached middle point, stop
Carriage – Moving, welding
|
(Ending point)
Detect limit
Carriage-Stop, Torch –movement, welding
|
 |
 |
 |
|
|
