|
|
 |
 Product information > Large STIFFENER automatic welding device |
 |
| As an exclusive welding device for horizontal fillets, it is equipped with two CO2 torch and many carriages to weld panel line stiffeners and various horizontal fillet welding surfaces. Using control panels installed to each carriage, the user can control carriage movement and welding arc at the same time. Also, by automatically detecting the end point of welding line, the machine is able to automatically terminate welding process without user control. It has enough space for the user to adjust shift distance between welding torches freely and it is designed to compensate with various support material’s height. It is also designed with air cylinder to minimize material dislocation and welding point movements during the welding process. |
 |
| NO |
Category |
Specifications |
Remarks |
| 1 |
Applied welding technique |
CO2 2 POLE double surface welding simultaneously |
 |
| 2 |
Applied welding form |
Horizontal fillet welding |
| 3 |
Major functions |
Wire feeder and various controllers |
| 4 |
Applied STIFFENER |
Max height 550MM, width 150MM |
| 5 |
Weight |
App. 70 KG (Wires not included) |
| 6 |
Input power |
AC 220V |
| 7 |
Composition |
Large welding Carriage + Control box + wire feeder
+ power cable 30m |
|
 |
| Classification |
Category |
Specifications |
Remarks |
| Carriage motor |
Motor, decelerator |
DC MOTOR, 2 axis |
SANYO |
| Movement method |
Motor + worm gear + SPUR gear + wheel |
|
| Motor + worm gear + SPUR gear + wheel |
0 - 1,000 MM/MIN |
|
| Wheel |
Forward – hard urethane wheel
Backward – steel, heat processed
|
|
| Wheel height |
Upper plate standard + 10MM |
|
| Surface support IDLE roller |
ROLLER, external diameter Ø60, Quantity-4 units |
|
| Material holding device |
Material holding method |
Pressure using air cylinder |
|
| Air cylinder |
Ø50 * 110ST 2 units |
Maximum WEB material 150MM |
| GUIDE method |
LM GUIDE |
|
| Manual torch adjustment |
Distance |
Vertical 50MM, Forward-backward 50MM |
|
| Form |
4 angle slide, DOVTAIL method |
|
| Control box |
Main Control device |
Small PLC installed |
|
| Major control category |
Power switch, start/end, welding/non-welding, forward/backward, current, voltage adjustment, wire inching, speed adjustment, material holding, current meter, voltage meter |
|
| Major installations |
PLC, SMPS, motor controller, relay |
|
| Floor detection sensor |
Floor detection sensor located at the front and back in order to prevent falling of major panel |
|
| Cable |
Direct connection to the welder |
|
|
|
